Skip to main content

Filter By:

Car Racks

$38.95
Give your truck bed a permanent bike-mounting solution with this fork-style mount. In fact, this mount, with single-sided adjustment skewer for easy loading, can be installed anywhere you can put a couple bolts. Go ahead, get creative. - A "bolt anywhere" fork-style bike mount - Fits bikes with 9mm x 100mm front hubs - Corrosion-resistant anodized aluminum construction Product Specs: - Weight: 0.50 lbs. - Dimensions: L 4.00 in x W 1.50 in x H 1.87 in - Limited Lifetime Warranty
$300.00
Carry 2 bikes in the bed of your pick-up truck with no bolting or drilling with this integrated locking fork mount carrier Features -Aluminum telescoping bar with SoftGrip™ rubber feet hold carrier on side rails of full size and small pick-up trucks without drilling (compatible with most bedliners) -3 One-Key lock cylinders included to lock the bikes to the carrier and the carrier to the truck. -Fits full size and small pick-up beds (compatible with most bed liners) -Carries 2 bikes. More bikes can be fit with the Bed-Rider Add On Block (#BRLB, sold separately)
Thule’s EasyFold XT is a fully foldable, compact, and easy-to-use hitch-mounted bike rack for all types of bikes. - Easy mounting of bikes through detachable bike arms with lockable - Thule AcuTight torque limiter knobs that “click” when optimal torque is reached - Fully foldable for convenient mounting, handling, and storage - Wheel straps with adjustable pump buckles for fastening wheels. (Optional XXL Wheel Strap kit to fit longer wheelbases and tires up to 4.7") - High load capacity enabling transport of e-bikes and heavy mountain bikes - Easy trunk access even with bikes mounted, thanks to smart foot pedal tilt - Foldable bike loading ramp integrates into rack for convenient storage (included) - Large distance between wheel holders enabling transport of sturdy bikes with large wheel bases - Ergonomic transport of the bike rack thanks to the integrated carrying handles - Lock your bikes to the bike rack and your bike rack to the receiver (locks included) - Thule Snug-Tite receiver lock virtually eliminates hitch rack movement in receiver and locks the hitch rack to the vehicle
$70.00
With Thule's Fat Tire Kit for T2 Racks you can finally throw your fat bike on your Thule rack (sold separately) and head for the hills. Oversize wheel trays accommodate tires up to 5-inches wide and the tray has been shaped to work perfectly with even the widest treads. An extra-long wheel strap is included to make fastening your rear wheel a breeze. This kit attaches easily to your Thule T2 hitch rack (sold separately) and includes the mounts needed for a single bike.
$200.00
Protect both your bikes and your pick-up on your next adventure with heavy-duty, adjustable, padded protection. Features - Flexible padding adjusts across a wide range of tailgates and large handle opening provides backup camera visibility - Bikes remain securely in place with integrated bike separation and multiple-position strap anchors - Bikes and pick-up trucks are protected during transport with heavy-duty vinyl, adjustable padding - Gear can be stored securely, even while driving, due to the inside-facing mesh pockets Technical specifications - Dimensions: 52 x 15.5 x 2.75 inch - Weight: 5.5-pound
$499.95
The MonoRail is the most versatile rack in the RockyMounts line up. It has the capacity for all styles of bikes; from skinny tire road machines, up to heavy fat tire E-bikes, this rack has you covered. - Carries 2 bikes, up to 60 lbs per tray (120 lbs total). 2” variant is expandable to 3 bikes up to 45 lbs per tray, with Add-On - No contact with frame, secures bicycle by front wheel - Carries road tires up to 5.0” fat bike tires, and diameters from 20” to 29” - Compatible with bicycle wheelbases from 36” to 50” - Folds flat against the vehicle and tilts down 30 degrees to allow for hatch access - Includes anti-wobble hitch pin - If you want to fit both 1.25" and 2" size hitches, get the 1.25" and our adaptor sleeve. This configuration does not allow for the use of an Add-On - Includes locking hitch bolt, cable lock, and standard lock pods, keyed alike - Note: Cable lock is not intended to be used while driving. Road vibrations can cause unintended wear on frames, rims, and the rack itself. Please remove cable lock when vehicle is in motion - Not for use with fender equipped bicycles - Rack weight 39 lbs (shipping weight 51 lbs) - Fit Memo- For cargo vans a fit check is required. Depending on hitch manufacturer, handlebar width, vehicle wheelbase, and accessories an 8" Hitch Extension may be required for handlebars to clear the door
$69.00
For those cases where fitment just isn't right. The Hi-Lo is a 2" hitch Extension & Rise/Drop built with Kuat style. It provides 7" or 10" of extension and 2.125" of rise/drop. The Hi-Lo comes with a threaded hitch pin to ensure a tight fit in your receiver. Approved for use with the Kuat NV 2.0, Base 2.0, Sherpa 2.0 and Transfer family.
$598.00
When your solo ride turns into a weekend expedition with friends, the NV 2.0 Add-On lets you increase the NV 2.0 carrying capacity from two to four bikes in less time than it takes your friends to decide who gets to sit up front. - Adjustable front tire cradle system - Fully integrated cable locks - Trail Doc compatible - Front tire ratchet design with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - Premium gloss metallic powder with water transferred logos - Compatible with 2” NV 2.0 - Increases 2” NV 2.0 carrying capacity to 4 bicycles weighing up to 40 - pounds each - Holds wheelbases up to 48” and tires as large as 4.8” - Quick change from 2 to 4 bikes
$749.00
Kuat's NV 2.0 Base is loaded with features that make it one of the most equipped platform racks on the planet. This darkened brute features Kuat's foot lever pivot release, adjustable cradles for increased bike fit, integrated cable locks, a hand-tight cam system, and a ballistic black powder coat that will stand up to years of abuse. - Adjustable front tire cradle system - Re-designed pivot with optional foot assist - Fully integrated cable locks and hitch lock included - Front tire ratchet with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - No-tool install with hand tight hitch cam system - Premium matte powder coat - 2 Bike capacity up to 60 lbs. each - Holds wheelbases up to 48-inch and tires as large as 4.8-inch - Available in both 2-inch & 1.25-inch hitch sizes - Dedicated 2-inch model is able to carry up to 4 bikes with optional NV Add-On 2.0 Base
$39.00
So the international bike builder didn’t consider your bike rack design when creating his new full suspension frame? No worries. Kuat’s Ubar can adapt almost any frame to fit our Alpha or Beta rack. Features - Adapts oddly shaped frames for use with hanging style racks - Spring loaded for a solid fit - Coated hooks (prevent wear on your bike) - Installs in seconds - Fits most bikes
$499.99
- Capacity: Two Bikes (Max. 80 lb per bike) - Hitch Size: 2" only (Do not use a 1-1/4" -2" hitch adapter) - Maximum bike wheelbase: 60" - Maximum tire width: 5" - Features extra heavy duty wheel holders, an internally reinforced frame and external brace for heavy load carrying capacity - Includes keyed alike locking hitch pin, 8' security cable and locking frame hooks - Patented "No-Wobble Hitch System" eliminates slack between the receiver and the rack without the use of tools - Folds flat against car when not in use - Tilts down for easy cargo door access - Space between bikes: 10 - For 20" Fat tire rear wheels you will need a Small Wheel Adapter (SW-ADP-U) to prevent derailleur hanger interference (You will only need one per bike) - For step through bicycles you will need to also purchase a Bike Adapter - Rack Weight: 58 lb - Limited Lifetime Warranty - Not to be used on any trailer, fifth wheel or towed vehicle
Page 1 of 1