Lighting

Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

- 350 lumen XM-L LED - Built-in Li-Ion USB rechargeable battery - Low battery, charging, and fully charged indicator - Includes USB charging cable - 3 modes (2 Steady and 1 Flashing) - Multi-fit QR handlebar bracket - 2.2 ~ 6 hour run time per charge

The Apollo is a waterproof super bright LED light that is small and easy to mount. FEATURES - USB Rechargeable - Strap Fits Bars 20-40mm - Waterproof - Micro USB Cable Included - 240° Visibility SPECS - Modes: High: 3 hrs, Medium: 6 hrs, Slow Flash: 50 hrs, & Quick Flash: 40 hrs - Weight: 29 Grams with Bracket - Runtime: Up to 50 hrs on Flash - Battery: Lithium Polymer

With a dazzlingly bright 28 LED PB Power Array and three modes, this USB rechargeable light is like a Scarlet Begonia for the back of your bike. For added safety, it has a CPSC certified reflector in the lens to keep you visible when the light is off. Versatile mounting options allow you to attach it to your seat post or rear rack with the included brackets. - PB 28 LED power array and CPSC certified reflector provides steady, Courtesy & Superflash modes - FL1 Tested - Run times: 5 hrs (steady – 20 lm), 9 hrs (Courtesy – 6-18 lm) and up to 30 hrs (Superflash - 20 lm) - Provide 160-degrees of visibility - Highly visible, even in daylight - Dust and water resistance rated to IP65 standard - 700 mAh lithium polymer battery charges in 2.5 hours with micro USB cable (included) - Includes rear rack and seat post mounts plus clip mount for multiple mounting options - 65 grams

Vmax+ 150 is NiteRider’s first taillight featuring COB (Chip-on-Board) LEDs, which for cyclists means it emits highly visible flash patterns in a smaller, more compact package. Its feather-like light weight makes it perfect as a wearable safety light—easily clipping onto straps, belt loops, and more! For added convenience, the Vmax+ 150 features mode memory, will power ON in the last mode used. - 6 Modes with Run Times: 4:30-25:30h - Lumen Output: 150 - Charge Time: 2:00h - Water / Dust Resistant IP64 Rated - USB-C Rechargeable - Mode Memory (Powers ON in last mode used)

Quick-release bar mount for Imjin or Nip lights. Use as a replacement for stock mount or utilize as a second mount if you switch the Imjin between multiple bikes. Included installation wedge helps to position light in perfect position.

The Nip fender mount is a clean, simple solution to mount the Nip e-Bike headlight above the wheel. This lower position is great for commuting in foggy/rainy conditions or if you simply want fewer mounts on your handlebar. - Compatible with Nip e-Bike headlights

Introducing Nip & Tuck - the next evolution in e-bike safety. Setting the benchmark for an integrated lighting solution, high-powered output is backed by industry-leading compact design. Nip (headlight) illuminates with a 500 lumen even spot beam with versatile low-profile mounting options. Tuck (taillight) blasts a strong red pulse with an innovative under-seat attachment to provide visibility at the highest point on the bike. Both Nip & Tuck feature hi-intensity amber side lighting establishing 360 degrees of protective visibility at intersections and high-traffic areas. Designed to provide peace of mind with safe and effective illumination, Nip & Tuck represents the next level of integrated e-bike lighting. Key features: - 500 lumen headlight and 25 lumen taillight certified to the FL-1 Standard - Engineered for seamless e-bike battery integration - Amber side lighting creates 360 degrees of protective visibility - Pulse mode for high traffic areas/day-time riding - Custom reflectors optimize beam pattern to provide efficient and effective distribution of light - Various low-profile headlight mounting options available - Taillight seat rail clamp with angle adjustment for universal mounting and effective visibility - IP67 Waterproof Rating for all conditions commuting – lights are tested to be fully submersible in 1 meter of water for 30 minutes - Designed and Assembled in California. - Backed by Light & Motion’s 2 Year Warranty and Enhanced Experience Guarantee

Tuck's powerful red pulse beam and ultra-compact size reinvents the e-Bike light. Maximizing output without bulk, the Tuck features an optimized reflector and amber side lighting for 180 degrees of protective visibility. Designed to integrate into popular 6 to 18V on-board batteries such as Shimano and Bosch systems, multiple mounting options creates the perfect e-Bike tail lighting solution. Key features: - 25 lumen taillight certified to the FL-1 Standard - Engineered for seamless e-bike battery integration - Amber side lighting creates 360 degrees of protective visibility - Pulse mode for high traffic areas/day-time riding - Custom reflectors optimize beam pattern to provide efficient and effective distribution of light - Various low-profile headlight mounting options available - Taillight seat rail clamp with angle adjustment for universal mounting and effective visibility - IP67 Waterproof Rating for all conditions commuting – lights are tested to be fully submersible in 1 meter of water for 30 minutes - Designed and Assembled in California. - Backed by Light & Motion’s 2 Year Warranty and Enhanced Experience Guarantee

Commute with confidence with the Vis E- 500 headlight. Asserting 500 lumens of certified power combined with safety side lighting for a full 180 degrees of protective visibility, Vis E- 500 easily integrates into 6-18V e-Bike systems. Ultra-compact construction and multiple mounting options create the ideal e-Bike light. Key features: - 500 Lumen output certified to the FL-1 Standard - Engineered with the best CREE LED and enhanced firmware for premium performance - Innovative amber side lighting increases overall visibility on the road, especially at intersections - Custom engineered micro-peened reflector optimizes the light to provide a smooth, even beam pattern that focuses the light -exactly where you need it - Designed to seamlessly integrate into an e-Bike's 6V to 18V on-board battery such as Bosch and Shimano systems - 0.6A peak current draw on high power with 12V system, 1.25A peak current draw on high power with 6V system - Waterproof design provides all-weather reliability (submersible up to 1 meter) - Multiple mounting options include GoPro interface and e-Bike specific designs Tech Specs - Lumen Output: High (500), Medium (250), Low (125), Pulse (125) - Beam Angle: 20° (spot) - IP Rating (FL-1): 67 - Depth Rating (FL-1): 1 meter - Impact Resistance (FL-1): 1 meter - Thermal Management: Passive Cooling - Fast Charge: False - Product Dimensions: 2.5" x 1.2" x 1.2" Comes with: - Bar Mount, Vis Trail/Imjin, Nip, VIS-E - GoPro Mount, Vis Adventure/Vis 360 Pro/Imjin, Nip, VIS-E

Convert your Light & Motion Vis 360 (sold separately) into a head mount and use it wherever your non-helmet adventures may lead you. Excels as a running companion and great for bicycle touring as it transforms your Vis 360 into a camping headlamp.

Taking the ultimate helmet lighting system – the Vis 360 – to the next level, the Vis Pro features an ultra-powerful 600-lumen headlight optimized for commuting and bright enough for twisty singletrack! The featherweight system is waterproof for all-conditions reliability and has an integrated rear light/battery pack that balances the unit on a variety of helmets. An essential setup for those requiring maximum protective visibility with powerful illumination. Featuring: - 600 Lumen Output Certified to the FL-1 Standard - Daylight Visible Pulse Mode - Integrated Battery Pack With Red Rear Lighting - Innovative Amber Sidelights Provides Critical Side Visibility at Intersections - Ultra-lightweight Setup With Easy Clip On/Off Design - Waterproof to 1 meter For All-Conditions Reliability - Accurate Battery Charge & Status Indicator - Micro USB Rechargeable Included: - Helmet Mounts & Micro USB Charging Cable

Bright and efficient multi-purpose e-bike cycling light. Durable, heat-dissipating CNC machined aluminum construction. Two ultra-high-output LEDs deliver up to 500 lumens. Enhanced MOR (Maximum Optical Reflection) lens with built-in side visibility. Intelligent Auto Day/Night dim mode. E-bike compatible 6 – 12v input, 6w easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Includes CNC fork mount and 140cm long power cable. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. *Direct X-Lock Mounting System not compatible with all stems. Please see installation manual for stem compatibility. Specs - Max Lumens: 500 - Dimensions: 44.5 x 41 x 25mm / 1.75 x 1.61 x 0.98"

German StVZO optimized lens with wide light spread. Two high-output LEDs provide 12 lumens. IPX7 water resistant rating. Composite matrix construction. E-bike compatible (6v input, 0.4w / 12v input 0.8w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm-long power cable included. 50 and 80mm mount spacing. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included

Lezyne Ebike Classic Stvzo E500 Headlight; An advanced StVZO certified e-bike cycling headlight. This light is housed in a high-quality machined aluminum body with computerized thermal management to maximize lumen output efficiency. Running on cutting-edge programming, this light offers up to an impressive 500 lumens of output. It comes with an integrated 130 cm (51.2 inches) cable that connects to the e-bike’s motor/battery system. Two mounting options are also included—one Composite Matrix front mount and one machined aluminum fork mount. Compatibility: 11 – 15v input, 7.5w. Download the manual below for further installation and compatibility. - 500 lumen - STVZO optimized lens - 130cm cable - Forward center mount and hardware

Lezyne Ebike Super E1000 Headlight: One of the most powerful and advanced StVZO certified e-bike cycling headlights, this light is housed in an expertly machined aluminum body with cooling fins that are engineered to maximize lumen output efficiency. Cutting-edge programming gives this light an innovative high beam/low beam system controlled by a remote switch that lets the user easily toggle between two modes—600 lumens or 1000 lumens—on-the-go via a handlebar mounted button. Thermal management is built into the programming, and it comes with an integrated 130 cm (51.2 inches) cable that connects to the e-bike’s motor/battery system. Two mounting options are also included—one Composite Matrix front mount and one machined aluminum fork mount. Compatibility: 11 – 15v input, 8.5w LB / 16w HB. Download the manual below for further installation and compatibility details. - 600 lumen with 1000 lumen high beam mode - STVZO optimized lens - 130cm cable - Aluminum fork mount, forward center mount, and hardware

The Hecto Drive 500XL is a compact, durable cycling light with a machined aluminum body with built-in cooling fins and cutouts for side visibility. Its single LED design provides an impressive maximum output of 500 lumens and eight output modes, including a Daytime Flash mode. Offering up to 20 hours of total runtime, charging is simple with an integrated cable-free USB stick, and the light straps securely to a variety of handlebar shapes and sizes. Specs - Max Lumens: 500 - Weight: 84g - Max Runtime: 20 hours - Recharge Time: 2:30 hours

Compact cycling light with a machined aluminum body. A bright, single LED system provides up to 400 lumens and a Daytime Flash mode. Battery runtime has increased by 2.5 hours for up to 20 hours of runtime. It features eight output modes and cutouts for side visibility. Charging is simple with an integrated cable-free USB stick. It securely straps to a variety of handle bar shapes and sizes. Specs - Max Lumens: 400 - Weight: 83g - Max Runtime: 20 hours - Recharge Time: 2:30

The Zecto Drive 200+ Rear is a low-profile, high-visibility light with an impressive 200 lumens of brightness. Its six combined solid and flash output modes offer versatile options for any situation. Its highly disruptive Daytime Flash mode ensures maximum visibility during daylight hours, and the intelligent Power Indicator displays battery runtime and increases side visibility. The light is fitted with a patented 2-in-1 clip and strap mounting system, allowing easy attachment to handlebars or loops. It is rigorously tested to IPX7 Waterproofing standards to withstand even the harshest weather conditions. With a 650 mAh battery capacity, the Zecto Drive 200+ Rear offers a maximum runtime of up to 35 hours in Femto mode. It also boasts USB-C waterproof charging(cable not included), making it easy to keep it charged and ready to go. - Max 200 lumens / 35-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Waterproof USB-C charging port with charge indicator - 2-in-1 clip and strap mounting system (Patented) - Multiple mounting options like dog collars or strollers - Six combined solid and flash output modes - Rigorously tested to IPX7 Waterproofing standards - 650 mAh battery capacity

Recon-E Light to Bosch motor unit connector cable.

- Maximum output to 20 lumens - ANSI certified lumens and runtime - IPX4 water resistant - Power status indicator alerts remaining run-time before powering off - Light memory mode - Compatible with Rev Comp, Compel, Roost, Strive, Lanza, Coveta, Liv Rev Comp and Luta series helmets

- Reliable and high quality LED Lamps and strips from leading manufacturer CREE - Total internal reflection (TIR) lenses draw LED light into efficient, well-controlled beams that maximize the usable lumens in the target area without glare - Precisely milled CNC 6061 Aluminum Housing for durability as well as fast heat dissipation - IPX6 waterproof rating - Different from traditional lithium battery bike lights, RECON-E lights are designed to plug into and work with most major - E-bike motor systems - Handle bar remote switch for on the fly control - Three mounting options - ANSI Certified

- Reliable and high quality LED Lamps and strips from leading manufacturer CREE - Total internal reflection (TIR) lenses draw LED light into efficient, well-controlled beams that maximize the usable lumens in the target area without glare - Precisely milled CNC 6061 Aluminum Housing for durability as well as fast heat dissipation - IPX6 waterproof rating - Different from traditional lithium battery bike lights, RECON-E lights are designed to plug into and work with most major - E-bike motor systems - Handle bar remote switch for on the fly control - Three mounting options - ANSI Certified

Compact and Versatile. The Recon TL100 is easy-to-use, ultra-portable and lightweight. With an integrated power indicator and IPX7 waterproof certification, the Recon TL100 provides maximum high-powered visibility at an accessible price. - Maximum output to 100 lumens - ANSI-Standard certified lumen output and runtime - Water proof to IPX7 standard - Disperse optics with side light design for over 180-degrees of visibility - Power status indicator alerts remaining run-time before powering off - Light memory mode - Compatible with Rev Comp, Compel, Roost and Prompt series helmets

Maintain Visibility All the Time. As with all the lights in the Recon series, the new Recon TL200 has a compact design, an integrated power indicator, complies with the ANSI standard and is IPX7 certified. Additionally, the smart light sensor can auto adjust the light output, day or night, to ensure you can be seen all the time. - Maximum output to 200 lumens - ANSI-Standard certified lumen output and runtime - Water proof to IPX7 standard - Two-lens focused and dispersed optics with side light design for over 270-degrees of visibility - Power status indicator alerts remaining run-time before powering off - Light memory mode - Compatible with Rev Comp, Compel, Roost and Prompt series helmets - Compatible with saddle rail mount, providing optimal angle for visibility

An easy to attach mount that allows you to clip your Recon TL to any compatible Giant helmet.